基于柠檬酸-铕纳米配位聚合物构建荧光探针快速检测汤煲中5’-肌苷酸含量

基于柠檬酸-铕金属有机纳米配体聚合物（citrate/europium lanthanide coordination polymer nanoparticles，Cit/Eu LCP NPs）构建快速检测肉品汤煲中5’-肌苷酸（inosine-5’-monophosphate，5’-IMP）的荧光探针。研究结果表明，5’-IMP对Cit/Eu?LCP?NPs有良好的荧光猝灭作用。在最佳条件下，该荧光探针在5’-IMP?2.5～200?μg/mL的质量浓度范围内呈现出良好的线性关系，检出限为0.17?μg/mL，且具备良好的抗干扰、稳定性和重复性。为了验证方法可行性，将该方法应用于实际鸡汤样品中的5’-IMP检测，测得加标回收率为97.85%～103.95%，可为快速检测肉品汤煲中5’-IMP提供新的思路和方法。     

Thermal analysis of polymer ignition

Gas phase criteria for the onset of flaming combustion of solids in fires are used to locate a critical temperature T_cr in a nonisothermal analysis (TA) experiment that corresponds to the surface temperature of the solid at ignition in a fire test, T_ign. This critical TA temperature occurs at low conversion of solid to gaseous fuel so it is independent of the heating rate in the test or the thermal decomposition reaction model. However, T_cr depends on the thermal properties of the polymer and the conditions of the fire test in which the gas phase criteria were measured. Nonisothermal analysis data in nitrogen and air were obtained for 20 polymers by thermogravimetric analysis and microscale combustion calorimetry. The critical temperatures T_crs obtained from TA experiments compared favorably with analytic results for a simple polymer ignition model and finite element simulations and were in qualitative agreement with ignition temperatures measured in standardized fire tests.     

Core–shell type multi‐arm azide polymers based on hyperbranched copolyether as potential energetic materials in solid propellants

A series of novel multi‐arm azide copolymers (POGs) with the same hyperbranched poly[3‐ethyl‐3‐(hydroxymethyl)oxetane] core (PEHO‐c) and different content of linear glycidyl azide polymer shell (GAP‐s) have been synthesized by sequential cationic ring‐opening polymerization and azidation. Detailed structural information of these copolyethers was deduced from Fourier transform infrared, ¹H NMR and inverse gated decoupled ¹³C NMR spectroscopies, matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry, gel permeation chromatography and elemental analysis. The molecular weight of POG having GAP‐s and PEHO‐c with a molar ratio 14.95:1 (R_s/c) was around 31 000 g mol^?1, far above that of linear GAP (around 4000 g mol^?1). The apparent viscosity and glass transition temperature (?51 to ?23 °C) decreased first and then slightly increased with increasing molecular weight. Thermal analysis revealed that all the obtained POGs exhibited excellent resistance to thermal decomposition up to 220 °C. Moreover, the energetic properties, investigated using oxygen bomb calorimetric measurements, indicated that the enthalpy of formation of the POGs was higher than that of general linear GAP, but similar to that of branched GAP under reasonable R_s/c. The compatibilities of the POGs with common materials used in solid propellants were studied using differential scanning calorimetry and the results indicated that the POGs had good compatibility with these materials. © 2017 Society of Chemical Industry     

Effect of matrix−nanoparticle supramolecular interactions on the morphology and mechanical properties of polymer foams

In this study, we report the fabrication of supramolecular polymer nanocomposite foams with a uniform cell structure, high cell density and high expansion ratio using a soft matrix of poly(methyl acrylate‐co‐2‐hydroxyethyl methacrylate) and silica nanoparticle fillers, both functionalized with ureido‐pyrimidinone (UPy) supramolecular groups. Microcellular structures were formed using a batch foaming process at 90 °C under a 9 MPa nitrogen atmosphere. Nanocomposites were characterized and compared before and after the foaming process to investigate the effect of supramolecular interactions on the thermomechanical properties and morphology of the foams. TEM images revealed that while strong inter‐filler supramolecular interactions do not have a positive effect on their dispersion state, matrix?filler interactions derived from hydrogen bonding UPy motifs result in a rather uniform distribution of nanoparticles. Competing filler?filler and matrix?filler supramolecular interactions can be balanced and optimized by adjusting UPy populations along the chains and on the surface of nanoparticles. At a given chain functionality, increasing the nanoparticle loading up to an optimum concentration improves the mechanical properties and formability of the system. Above such concentration strong interactions between fillers, which are not compensated by the matrix, result in large aggregates and consequently undermine the material performance. Supramolecular polymer foams illustrate a similar thermal and viscoelastic behavior to that of neat samples but after foaming, due to the formation of a cellular structure and rearrangement or dissociation of UPy dimers under the foaming conditions, the elastic modulus is reduced. © 2018 Society of Chemical Industry     

Polymers beyond standard optical fibres – fabrication of microstructured polymer optical fibres

This paper reports the overall fabrication process of microstructured polymer optical fibres (mPOFs). mPOF fabrication involves a two‐step process: on the one hand, the design and creation of a preform containing a large‐scale version of the desired fibre and, on the other, the precise heating and drawing of the preform to the final fibre. The preforms are produced either by an improved drilling technique or by capillary stacking. For a correct and accurate drawing of the fibre, a controlled and precise heating unit has to be designed, an issue that will be explained in detail in this work. The quality and optical performance of the final mPOF depends strongly on key factors such as the preform annealing, the accuracy of the technique selected for the creation of the preform structure, the heating stage, as well as on the drawing parameters. All of them are analysed in detail and some drawn mPOFs of interest are reported as well. © 2018 Society of Chemical Industry     

Morphology,mechanical properties and electromagnetic shielding effectiveness of poly(styrene‐b‐ethylene‐ran‐butylene‐b‐styrene)/carbon nanotube nanocomposites: effects of maleic anhydride,carbon nanotube loading and processing method

Nanocomposites based on poly(styrene‐b‐ethylene‐ran‐butylene‐b‐styrene) (SEBS) and carbon nanotubes (CNTs) (SEBS/CNT) as well as SEBS grafted with maleic anhydride (SEBS‐MA)/CNT were successfully prepared for electromagnetic shielding applications. Both SEBS/CNT and SEBS‐MA/CNT nanocomposites were prepared by melt compounding and were post‐processed using two different techniques: tape extrusion and compression moulding. The different nanocomposites were characterized by Raman spectroscopy and rheological analysis. Their mechanical properties, electrical properties (10^-2–10⁵ Hz) and electromagnetic shielding effectiveness (8.2–12.4 GHz) were also evaluated. The results showed that the CNT loading amount, the presence of MA in the matrix and the shaping technique used strongly influence the final morphologies and properties of the nanocomposites. Whilst the nanocomposite containing 8 wt% CNTs prepared by compression moulding presented the highest electromagnetic shielding effectiveness (with a value of 56.73 dB, which corresponds to an attenuation of 99.9996% of the incident radiation), the nanocomposite containing 5 wt% CNTs prepared by tape extrusion presented the best balance between electromagnetic and mechanical properties and was a good candidate to be used as an efficient flexible electromagnetic interference shielding material. © 2018 Society of Chemical Industry     

Hydrolytic degradation of poly(l‐lactic acid)/poly(methyl methacrylate) blends

The hydrolytic degradation of poly(l ‐lactic acid)/poly(methyl methacrylate) (PLLA/PMMA) blends was carried out by the immersion of thin films in buffer solutions (pH = 7.24) in a shaking water bath at 60 °C for 38 days. The PLA/PMMA blends (0/100; 30/70; 50/50; 70/30; 100/0) were obtained by melt blending using a Brabender internal mixer and shaped into thin films of about 150 µm in thickness. Considering that PMMA does not undergo hydrolytic degradation, that of PLLA was followed via evolution of PLA molecular weight (recorded by size exclusion chromatography), thermal parameters (differential scanning calorimetry (DSC)) and morphology of the films (scanning transmission electron microscopy). The results reveal a completely different degradation pathway of the blends depending on the polymethacrylate/polyester weight ratio. DSC data suggest that, during hydrolysis at higher PMMA content, the polyester amorphous chains, more sensitive to water, are degraded before being able to crystallize, while at higher PLLA content, the crystallization is favoured leading to a sample more resistant to hydrolysis. In other words, and quite unexpectedly, increasing the content of water‐sensitive PLLA in the PLLA/PMMA blends does not mean de facto faster hydrolytic degradation of the resulting materials. © 2018 Society of Chemical Industry     

高分子脱硝技术在燃煤锅炉中的应用

简要介绍了高分子脱硝技术的工作原理、特点及其优势,从燃煤锅炉脱硝改造的可行性入手,结合同煤集团燕子山矿锅炉脱硝改造的基本情况、治理的技术以及流程,并结合国内煤炭行业的实际情况,对燃煤锅炉脱硝治理的前景进行了客观的分析和展望。     

压力与温度敏感涂料用高分子粘结剂的研究进展

压力敏感涂料(PSP)以及温度敏感涂料(TSP)是通过光学手段研究物体表面压力和温度的功能涂层。简述了气体在聚合物中的渗透机理,发光分子氧猝灭以及热猝灭机理,综述了国内外PSP、TSP中常用的高分子粘结剂,并对PSP、TSP所用高分子粘结剂的未来发展方向进行了展望。这两种涂层均由高分子粘结剂和发光分子探针组成,PSP通过发光探针与氧分子作用产生的光物理行为变化来反映压力大小,TSP是通过发光探针随模型表面温度变化导致光物理行为变化来反映温度高低。目前,已发展的PSP用高分子粘结剂主要为氧透过率较高的含硅聚合物及丙烯酸酯类聚合物;已发展的TSP用高分子粘结剂主要为氧透过率较低的聚苯乙烯、聚丙烯腈、聚氨酯等。高分子粘结剂的主链结构、侧基种类与极性、分子间堆砌密度以及与发光分子相互作用,对涂层光物理性能、力学性能以及与基材结合力产生影响。因此,研究PSP与TSP中的高分子粘结剂对于未来两种技术的优化以及一定特殊要求下的应用有较为重要的意义。     

Optimal parameter estimation for PEMFC using modified monarch butterfly optimization

The present study develops a new optimization method called monarch butterfly optimization algorithm for optimal parameter estimation of the polymer electrolyte membrane fuel cell (PEMFC). After designing the proposed methodology, it is implemented to 250 MW PEMFC stack under different operating conditions to show the system efficiency and the results are compared with some state-of-the-art methods including Grass Fibrous Root Optimization Algorithm, hybrid Teaching Learning Based Optimization-Differential Evolution Algorithm, and the basic MBO algorithm. Two operational conditions in 3/5 bar and 80°C and 2.5/3 bar, 70°C are used for model verification. The main idea is to minimize the sum of square error (SSE) between the estimated and the actual data. Simulation results in the first condition give an SSE of value 7.277667729 with 9.28434e−16 SD value and in the second condition, an SSE of value 4.52810115 with 0.043581628 standard deviations has been reached as the minimum value among the other compared methods that indicate the accuracy and the robustness of the suggested method toward the analyzed methods. The algorithm also gives a convergence speed of 540 iterations and 370 iterations for conditions 1 and 2, respectively that are the fastest in the study.